Click image to view full size image
Ribbed type fenders for ship floating rubber pneumatic marine fender
what's ribbed type marine rubber pneumatic fender
Ribbed type marine rubber pneumatic fenders are extensively used for ship to ship transfers at mid seas, double banking operations, and as vessel-to-berth at dock/jetties. The special property of a pneumatic fender is its low reaction force at low deflection. This property of pneumatic fenders make them the most suitable fender for liquid cargo vessels and defense vessels with very sensitive equipment. These fenders have excellent energy absorption characteristics and linear load deflection characteristics. Floading Pneumatic fenders should comply to the ISO 17357 standard.
All our pneumatic marine rubber fenders are manufactured and tested in accordance with ISO17357:2002.
Major Strengths Of Our marine rubber fender:
1. High safety level: our pneumatic fenders can stand the maximum pressure up to 4 times that of the operating pressure.
2. Easy maintenance: our fenders just need inflation once every six months.
3. Low transportation cost: our fenders can be deflated and folded for transportation, thus saving about two thirds of the transportation cost.
4. Long lifespan: it is guaranteed that our fenders can be used for over 10 years under normal conditions.
marine rubber fender Description:
Pneumatic fenders are ideal for permanent & semi-permanent port applications where there is a solid faced quay structure or suitable supporting frame i.e. ideal in the situations where a fixed fender is not applicable such as to Ship-To-Ship (STS) operations off shore and some Ship-To-Wharf (STW)
operations and suitable for the use at a quay where the tidal range is large. Since pneumatic fenders are very easy to install, they can quickly be redeployed to wherever they are needed.
These pneumatic fenders are also useful as supplementary protection and for special vessels where the permanent fixed fenders may be unsuitable.
Manufactured as per ISO 17357 with 0.5 kg/cm2 and 0.8 kg/cm2 internal pressure, these Fenders are extensively used for ship to ship transfers at mid sea, as well as vessel to berth at dock/jetty.
marine rubber fender Specifications and sizes :
The guaranteed energy absorption of marine rubber fenders are the energy absorption at 60% deflection. This value can be use in engineering design and actual operation. Table gives the sizes, weights and technical performance of pneumatic marine rubber fenders.
| Nominal size (DxL)meter | Initial internal pressure Po=0.05Mpa | Initial internal pressure Po=0.08Mpa | ||||
| Load (kg) | R (KN) | Energy (KJ) | Load (kg) | Ribbed type Marine Rubber Fender for ship , floating pneumatic marine fender |
 Sell
New Login
Company QR code Anytime Anywhere Mobile |
|